Skip to main content

Large Automatic Film Coater


Sometimes you may have to apply films on some materials for specific reasons. For this film the uniformity, thickness and surface smoothness are very important.
To obtain these properties properly you need some specific equipment. Automatic film coater is one of them when you need a coating on your materials.
The automatic film coater provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way to eliminate variations caused by human factors. Variations in speed, pressure and direction of drawdown cause irregularities. Other factors that may influence the result are the shear rate and the weight of the applicator. With the automatic film coater these variable factors are being stabilized. Over the complete surface the film thickness is even. Samples created with the automatic film applicator are reproducible. It’s possible to produce many identical laboratory precision drawdowns in a short period of time.
The quality of the applied film is important for research on rheological properties of the applied media. To prepare samples for testing rheological properties, abrasion resistance, hiding power and gloss the automatic film coater is a must have. Multiple types of automatic film coaters are available for either glass/paper/metal substrates or foils. All models can be used in combination with either standard block type film coaters such as bird/baker models, or spiral bar type film applicators (wire wound rod type) depending on the chosen configuration.
Since automatic film coaters always offer the same conditions of applications like speed of application, applied pressure to the sample, it is very advantageous to have them in your research area.
Our automatic film coater product designed to produce films with consistent thickness by using micrometer adjustable applicators or fixed thickness applicators. It has a unique driving system to produce smooth coating on all types of materials. The flat vacuum chuck is built in to hold substrate sheet in place, which is particularly useful when coating on thin substrate and making uniform tape casting. One micrometer adjustable applicator is included for immediate use. This machine can be used for research on ceramic tape casting and Li-Ion battery electrode coating.
You can give an order of large automatic film coater from the link given below:

Comments

Post a Comment

Popular posts from this blog

Molybdenum Trioxide Nanoparticles/Nanopowder and Applications

General Information about Molybdenum Trioxide                                                     Molybdenum trioxide is chemical compound with the formula MoO3. Its chief application is as an oxidation catalyst and as a raw material for the production of molybdenum metal.  Molybdenum Trioxide  is a very light blue powder. Molybdenum Trioxide Nanoparticles/Nanopowder and Their Applications                                                    Like many  nanoparticles/nanopowder , Molybdenum Trioxide nanoparticles/nanopowder are used as catalysts. These catalysis reactions include hydrogenation catalysis and cracking catalysis. Molybdenum Trioxide nanoparticles/  nanopowder are useful for...
Post a Comment
Read more

Cadmium Sulfide Nanopowder and Its Applications

Cadmium sulfide is the inorganic compound with the formula CdS. Cadmium sulfide is a yellow solid. It occurs in nature with two different crystal structures as the rare minerals greenockite and hawleyite. As a compound that is easy to isolate and purify, cadmium sulfide the principal source of cadmium for all commercial applications. Its vivid yellow color led to its adoption as a pigment for the yellow paint "cadmium yellow" in the 18th century. Cadmium Sulfide Nano Powder, CdS (99.9+%, 20 nm)  shows unique physical, chemical and structural properties from the bulk. The melting point, electronic absorption spectra, band gap energy crystal structure, and other properties of cadmium sulfide nanoparticles are affected by size. Thus, cadmium sulfide on the whole is an attractive system for practicing synthetic chemistry for nanocrystals and for understanding the chemistry, growth history of nanomaterials and also for various technical applications. Colloidal dispersions of ...
Post a Comment
Read more

Carbon Nanotubes Doped with Graphene Nanopowder and Applications

Carbon nanotubes and graphene are different forms of carbon atom based materials. They have different properties and can be used in various applications. But what happens if we use them as a hybrid structure? The excellent mechanical, physical, and chemical properties of low-dimensional carbon materials like graphene and carbon nanotube have enabled them as promising building blocks for three-dimensional nanoarchitectures. In this regard, extensive interests have been attracted to synthesize graphene and carbon nanotube hybrid structures. Earlier works suggested that  Carbon Nanotubes Doped with Graphene Nanopowder (52 wt% Graphene )  is a promising solution for quick energy dissipation, which could enhance interface thermal conductivity of the ‘building blocks’ for future nanoscale mechanical and electrical devices. In the electricity perspective, it is found that ‘CNT pillared-graphene’ system would extend the excellent electrical conductivity of graphene and nanotube to ...
Post a Comment
Read more