Skip to main content

Barium Fluoride Sputtering Targets and Applications

Barium fluoride (BaF2) is a chemical compound of barium and fluorine and is a salt. It is a solid which can be a transparent crystal.
Barium fluoride is a chemical compound for the 10 to 20µm wavelength infrared region. Barium fluoride is used in aluminium-metallurgy, enamel and glazing frits production and the production of welding agents.
In aluminum-metallurgy, barium fluoride is used as additive in aluminum refining process. When we look at the surface treatment in aluminum industry, we see that bright reflective surface on the aluminum is achieved by chemical polishing. Inorganic fluorides like barium fluoride are also of critical importance in the flux brazing of aluminum and aluminum alloys, acting to remove the oxide layer.
There are many researches done about barium fluoride. Here is one example:
You may give an order of barium fluoride from the links given on the table below.
TypeSizeThicknessPurityLink
Barium Fluoride2'0.125''99.9%https://nanografi.com/sputtering-targets/barium-fluoride-baf2-sputtering-targets-size-2-thickness-0-125-purity-99-99/
Barium Fluoride2'0.250''99.9%https://nanografi.com/sputtering-targets/barium-fluoride-baf2-sputtering-targets-size-2-thickness-0-250-purity-99-99/
Barium Fluoride3'0.125''99.9%https://nanografi.com/sputtering-targets/barium-fluoride-baf2-sputtering-targets-size-3-thickness-0-125-purity-99-99/
Barium Fluoride3'0.250''99.9%https://nanografi.com/sputtering-targets/barium-fluoride-baf2-sputtering-targets-size-3-thickness-0-250-purity-99-99/
Barium Fluoride4'0.125''99.9%https://nanografi.com/sputtering-targets/barium-fluoride-baf2-sputtering-targets-size-4-thickness-0-125-purity-99-99/
Barium Fluoride4'0.250''99.9%https://nanografi.com/sputtering-targets/barium-fluoride-baf2-sputtering-targets-size-4-thickness-0-250-purity-99-99/
Barium Fluoride5'0.125''99.9%https://nanografi.com/sputtering-targets/barium-fluoride-baf2-sputtering-targets-size-5-thickness-0-125-purity-99-99/
Barium Fluoride5'0.250''99.9%https://nanografi.com/sputtering-targets/barium-fluoride-baf2-sputtering-targets-size-5-thickness-0-250-purity-99-99/
Barium Fluoride6'0.125''99.9%https://nanografi.com/sputtering-targets/barium-fluoride-baf2-sputtering-targets-size-6-thickness-0-125-purity-99-99/
Barium Fluoride6'0.250''99.9%https://nanografi.com/sputtering-targets/barium-fluoride-baf2-sputtering-targets-size-6-thickness-0-250-purity-99-99/
Barium Fluoride8'0.125''99.9%https://nanografi.com/sputtering-targets/barium-fluoride-baf2-sputtering-targets-size-8-thickness-0-125-purity-99-99/
Barium Fluoride8'0.250''99.9%https://nanografi.com/sputtering-targets/barium-fluoride-baf2-sputtering-targets-size-8-thickness-0-250-purity-99-99/

Comments

Post a Comment

Popular posts from this blog

Usage of Silver Conductive Adhesive Paste in Corrosion Protection

In electronics, solders are main material to connect electrical components to substrates which are generally printed circuit boards. Although they are cheap, they are not effective if long term performance is considered since solders have low resistivity to corrosion relatively. Since corrosion reduce reliability, the cost of advanced technological systems such as RADAR, SONAR, LIDAR and more increase. In addition, small signals can be lost, and in huge data transfer, some of the data can be lost also especially which may lead catastrophic failures in critical systems. For instance, surface to air missiles can be launched to target which is not exist if the data coming from detection systems is noisy. Therefore, corrosion protection is necessary, and  silver conductive adhesive paste  is an essential candidate to replace PbSn solders due to its resistivity to corrosion. Silver conductive adhesive paste provide not only noisy reduction but also electromagnetic interference whi...
Post a Comment
Read more

Titanium Carbide Powders and Applications

Titanium carbide which has the chemical formula of TiC attracted great interest for many structural applications due to its extremely high melting temperature, high hardness, high chemical resistance and good electrical conductivity. Therefore titanium carbide can be used in cutting tools, grinding wheels, wear-resistant coatings, high temperature heat exchangers, magnetic recording heads, turbine engine seals, and bullet-proof vests, etc. In addition, a promising field of application comprises plasma and flame spraying processes in air, where titanium carbide-based powders show high-phase stability. TiC(Titanium Carbide Powder) (325 mesh, 99,9+%)  can also be used in biomedical implant devices. Materials used for biomedical implant devices must satisfy a variety of property demands, which are often mutually exclusive. Further, different parts of a device demand different material properties. These factors often make it difficult to manufacture a medical device using a...
Post a Comment
Read more

Nanocellulose: Descriptions, Usage and Applications

Nanocellulose  is denoted by nano-structured cellulose which consist of C6H10O5. Since cellulose is abundant polymer in nature, large quantity of nanocellulose can be manufactured from the cost-effective aspect. Non-toxic and lightweight properties make it easy to carry, so it can be used in applications which requires mobility. High tensile, stiffness and electrical conductivity expand its usage through electrical and mechanical applications. Unique properties depending on the type of nanocellulose are also exist. There are three types which are cellulose nanocrystal (CNC), cellulose nanofibers (CNF), and bacterial nanocellulose (BNC). First type of nanocellulose is  cellulose nanocrystal , development in applications show that CNCs have unique specialities for improving mechanical properties of nanocomposites such as electrospun nanocomposite fibers/mats and nanocomposite hydrogels. Numerous nanocomposite hydrogels reinforced with CNCs can be designed to be sens...
Post a Comment
Read more