Skip to main content

Chromium Sputtering Targets and Applications

Chromium is a silvery, lustrous, hard, and brittle metal known for its high mirror polish and corrosion resistance.
Chromium sputtering targets find a large usage area in automobile industry. To form a shiny coating found on wheels and bumpers chromium sputtering targets are good materials. In many vacuum applications like automotive glass coatings chromium sputtering targets can be used.
Chromium has high resistance to corrosion and this property makes chromium sputtering targets suitable to obtain corrosion resistance coatings.
In industry hard material coatings obtained by chromium sputtering targets optimally protect engine components such as piston rings against premature wear and consequently extend the useful life of important engine parts.
Chromium sputtering targets also find usage areas in photovoltaic cell fabrication and battery fabrication.
As a summary, when we look at the whole applications where chromium sputtering targets are used we see that they are used in various technologies for the physical deposition of thin films and functional coatings (the PVD method) in the production of electronic components, displays and tools; in the vacuum chroming of watches, parts of household appliances, the working surfaces of hydro-pneumcylinders, slide valves, piston rods, tinted glass, mirrors, car parts and accessories, and other machines and devices.
For detailed information about film formation of chromium sputtering targets you can follow the link given below.
You can give an order of chromium sputtering targets from the links given on the table below.
TypeSizeThicknessPurityLink
Chromium3'0.125''99.8% - 99.9%https://nanografi.com/sputtering-targets/chromium-cr-sputtering-targets-size-3-thickness-0-125-purity-99-95/
Chromium4'0.125''99.8% - 99.9%https://nanografi.com/sputtering-targets/chromium-cr-sputtering-targets-size-4-thickness-0-125-purity-99-95/
Chromium4'0.250''99.95%https://nanografi.com/sputtering-targets/chromium-cr-sputtering-targets-size-4-thickness-0-250-purity-99-95/
Chromium6'0.125''99.95%https://nanografi.com/sputtering-targets/chromium-cr-sputtering-targets-size-6-thickness-0-125-purity-99-95/
Chromium6'0.250''99.95%https://nanografi.com/sputtering-targets/chromium-cr-sputtering-targets-size-6-thickness-0-250-purity-99-95/
Chromium8'0.125''99.95%https://nanografi.com/sputtering-targets/chromium-cr-sputtering-targets-size-8-thickness-0-125-purity-99-95/
Chromium8'0.250''99.95%https://nanografi.com/sputtering-targets/chromium-cr-sputtering-targets-size-8-thickness-0-250-purity-99-95/
Chromium (Indium)3'0.125''99.95%https://nanografi.com/sputtering-targets/chromium-indium-cr-sputtering-targets-size-3-thickness-0-125-purity-99-95/
Chromium Oxide (Indium)5'0.125''99.8%https://nanografi.com/sputtering-targets/chromium-oxide-indium-cr2o3-sputtering-targets-size-2-thickness-0-125-purity-99-8/

Comments

Popular posts from this blog

Usage of Silver Conductive Adhesive Paste in Corrosion Protection

In electronics, solders are main material to connect electrical components to substrates which are generally printed circuit boards. Although they are cheap, they are not effective if long term performance is considered since solders have low resistivity to corrosion relatively. Since corrosion reduce reliability, the cost of advanced technological systems such as RADAR, SONAR, LIDAR and more increase. In addition, small signals can be lost, and in huge data transfer, some of the data can be lost also especially which may lead catastrophic failures in critical systems. For instance, surface to air missiles can be launched to target which is not exist if the data coming from detection systems is noisy. Therefore, corrosion protection is necessary, and  silver conductive adhesive paste  is an essential candidate to replace PbSn solders due to its resistivity to corrosion. Silver conductive adhesive paste provide not only noisy reduction but also electromagnetic interference whi...

Reduced Graphene Oxide and Applications

Graphene oxide (GO)  is a type of graphene that contains oxygen functional groups and has some interesting properties different than those of graphene. By reducing graphene oxide,  reduced graphene oxide  is obtained which is abbreviated to rGO. In this process, the functional groups of graphene are removed but it still contains residual oxygen, hetereatoms and structural defects which decrease its quality. Having less-quality compared to pristine graphene, rGO is still an outstanding material for various applications since it resembles an attractive cost and manufacturing processes compared to the pristine graphene. Especially, it is preferred in applications that call for a large amount of material. Depending on the method of preparation of reduced graphene oxide, properties and morphology of the rGO can vary.  Some preparation methods  of reduced graphene oxide include: treating graphene oxide with hydrazine hydrate at 100°C for 24 hours exposure to h...

Nanocellulose: Descriptions, Usage and Applications

Nanocellulose  is denoted by nano-structured cellulose which consist of C6H10O5. Since cellulose is abundant polymer in nature, large quantity of nanocellulose can be manufactured from the cost-effective aspect. Non-toxic and lightweight properties make it easy to carry, so it can be used in applications which requires mobility. High tensile, stiffness and electrical conductivity expand its usage through electrical and mechanical applications. Unique properties depending on the type of nanocellulose are also exist. There are three types which are cellulose nanocrystal (CNC), cellulose nanofibers (CNF), and bacterial nanocellulose (BNC). First type of nanocellulose is  cellulose nanocrystal , development in applications show that CNCs have unique specialities for improving mechanical properties of nanocomposites such as electrospun nanocomposite fibers/mats and nanocomposite hydrogels. Numerous nanocomposite hydrogels reinforced with CNCs can be designed to be sens...