Skip to main content

Barium Sputtering Targets and Applications


Barium with the atomic symbol of Ba and atomic number of 56 is a Block S, Group 2, Period 6 element with an atomic weight of 137.27. Barium is a member of the alkaline-earth metals.
Barium sputtering targets can be for plating of electronic devices. Barium has good electrical properties and these properties make it useful for sputtering applications. For semiconductors barium sputtering targets can be used.
For flat panel displays barium sputtering targets will be a good choice.
Barium can make alloys with other metals like strontium and titanium and gain more specific properties especially when these alloys are used for sputtering. You can find many researches about barium and its alloys where they are used as sputtering targets.

You can give an order of barium sputtering targets from the link given on the table below.
Type
Size
Thickness
Purity
Link
Barium
1'
0.125''
99.5%
Barium
1'
0.250''
99.5%
Barium
2'
0.125''
99.5%
Barium
2'
0.250''
99.5%
Barium
3'
0.125''
99.5%
Barium
3'
0.250''
99.5%
Barium
4'
0.125''
99.5%
Barium
4'
0.250''
99.5%

Comments

Popular posts from this blog

Usage of Silver Conductive Adhesive Paste in Corrosion Protection

In electronics, solders are main material to connect electrical components to substrates which are generally printed circuit boards. Although they are cheap, they are not effective if long term performance is considered since solders have low resistivity to corrosion relatively. Since corrosion reduce reliability, the cost of advanced technological systems such as RADAR, SONAR, LIDAR and more increase. In addition, small signals can be lost, and in huge data transfer, some of the data can be lost also especially which may lead catastrophic failures in critical systems. For instance, surface to air missiles can be launched to target which is not exist if the data coming from detection systems is noisy. Therefore, corrosion protection is necessary, and  silver conductive adhesive paste  is an essential candidate to replace PbSn solders due to its resistivity to corrosion. Silver conductive adhesive paste provide not only noisy reduction but also electromagnetic interference whi...

Reduced Graphene Oxide and Applications

Graphene oxide (GO)  is a type of graphene that contains oxygen functional groups and has some interesting properties different than those of graphene. By reducing graphene oxide,  reduced graphene oxide  is obtained which is abbreviated to rGO. In this process, the functional groups of graphene are removed but it still contains residual oxygen, hetereatoms and structural defects which decrease its quality. Having less-quality compared to pristine graphene, rGO is still an outstanding material for various applications since it resembles an attractive cost and manufacturing processes compared to the pristine graphene. Especially, it is preferred in applications that call for a large amount of material. Depending on the method of preparation of reduced graphene oxide, properties and morphology of the rGO can vary.  Some preparation methods  of reduced graphene oxide include: treating graphene oxide with hydrazine hydrate at 100°C for 24 hours exposure to h...

Nanocellulose: Descriptions, Usage and Applications

Nanocellulose  is denoted by nano-structured cellulose which consist of C6H10O5. Since cellulose is abundant polymer in nature, large quantity of nanocellulose can be manufactured from the cost-effective aspect. Non-toxic and lightweight properties make it easy to carry, so it can be used in applications which requires mobility. High tensile, stiffness and electrical conductivity expand its usage through electrical and mechanical applications. Unique properties depending on the type of nanocellulose are also exist. There are three types which are cellulose nanocrystal (CNC), cellulose nanofibers (CNF), and bacterial nanocellulose (BNC). First type of nanocellulose is  cellulose nanocrystal , development in applications show that CNCs have unique specialities for improving mechanical properties of nanocomposites such as electrospun nanocomposite fibers/mats and nanocomposite hydrogels. Numerous nanocomposite hydrogels reinforced with CNCs can be designed to be sens...