Skip to main content

Polytetrafluoroethylene (PTFE) Condensed Liquid Binder for Li-ion Battery

In lithium ion batteries it is very important to choose a good binder for the electrodes. There are some requirements that the binder has to meet to have durability and long cycle life. The binder should be chemically inert and electrochemically stable to get the best performance from lithium ion batteries. The other important point is that these properties should be gotten by lower amounts of binders.
One of these binders that meet the requirements is Polytetrafluoroethylene (PTFE) Condensed Liquid Binder for Li-ion Battery. PTFE is a synthetic fluoropolymer of tetrafluoroethylene that has numerous applications. PTFE is a fluorocarbon solid, as it is a high-molecular-weight compound consisting of carbon and fluorine. PTFE is hydrophobic material; so, it does not interact with water or water containing substances because of the London forces due to high electronegativity of fluorine. 
PTFE binders has a CF2-CF2 unit which demonstrates excellent chemical stability for Li-Ion battery applications. PTFE condensed liquid binder is also environmentally friendly. In this binder water is used as solvent that is not harmful to health. PTFE has excellent chemical resistance. PTFE binders also have high heat and cold resistance. It provides high resistance to fire and also it has low water absorption. PTFE is also resistant to UV rays (ultraviolet) and it has good weather resistance, low friction coefficient. 
If you need Polytetrafluoroethylene (PTFE) Condensed Liquid Binder for Li-ion Battery, you may visit our website by clicking the link below:
Labels:

Comments

Post a Comment

Popular posts from this blog

Molybdenum Trioxide Nanoparticles/Nanopowder and Applications

General Information about Molybdenum Trioxide                                                     Molybdenum trioxide is chemical compound with the formula MoO3. Its chief application is as an oxidation catalyst and as a raw material for the production of molybdenum metal.  Molybdenum Trioxide  is a very light blue powder. Molybdenum Trioxide Nanoparticles/Nanopowder and Their Applications                                                    Like many  nanoparticles/nanopowder , Molybdenum Trioxide nanoparticles/nanopowder are used as catalysts. These catalysis reactions include hydrogenation catalysis and cracking catalysis. Molybdenum Trioxide nanoparticles/  nanopowder are useful for...
Post a Comment
Read more

Hydroxyapatite Nanopowders and Their Applications

Hydroxyapatite, is a naturally occurring mineral form of calcium apatite with the formula Ca 5 (PO 4 ) 3 (OH). Pure hydroxyapatite powder is white. Naturally occurring apatites can, however, also have brown, yellow, or green colorations, comparable to the discolorations of dental fluorosis. Hydroxyapatite Nanopowder/Nanoparticles (50 nm, 99.95+%)  has been widely used as a biocompatible ceramic in many areas of medicine, but mainly for contact with bone tissue, due to its resemblance to mineral bone. In mammals, the skeleton presents a carbonated and partially substituted apatite, based on nanocrystal aggregates, and associated with collagen, building up 3-D structures present in various bone tissue conformations like trabecular or cancellous bone. There has been growing interest in developing bioactive synthetic ceramics that could closely mimic natural apatite characteristics. As mentioned before,  Hydroxyapatite Nanopowder  is the main inorganic constituent of bon...
Post a Comment
Read more

Rundown about Silicon Oxide Wafer

The main insulating material used in micro-technology is Silicon Dioxide, which in chemical symbols is written as SiO2. In semiconductor technology, SiO2 thin film layers are mainly used as dielectric material film in transistors, capacitors (DRAM) or flash-memories. Silicon Oxide Wafers are produced using crystallization, solid state and other ultra-high purification processes such as sublimation. This process forms a cylindrical ingot, which is then sliced and polished to form wafers. Thermal oxide is a kind of "grown" oxide layer, compared to CVD deposited oxide layer, it has a higher uniformity, and higher dielectric strength, it is an excellent dielectric layer as an insulator . In most silicon- based devices, thermal oxide layer play an important role to pacify the silicon surface to act as doping barriers and as surface dielectrics. The simplest way to produce an insulating silicon oxide layers (SiO2) on silicon wafers is to oxidize silicon with oxygen, which ...
Post a Comment
Read more