Skip to main content

Nickel Vanadium Sputtering Targets and Applications

Generally nickel vanadium alloys can be obtained in composition of Ni:V is 1:7 in weight and this alloy have numerous applications in semiconductor industry. This alloy shows the electrical, chemical and optical properties of nickel. By adding vanadium to nickel, we can also get being non-ferromagnetic property from this alloy. By the property of being non-ferromagnetic nickel vanadium sputtering targets can be used in magnetron sputtering.
As we mentioned before nickel vanadium sputtering targets can be used in semiconductor applications. To obtain resistive films, diffusion barriers and prewetting layers nickel vanadium sputtering targets can be a good choice. The films which can be obtained by nickel vanadium alloy sputtering targets can be used in adhesion layers for under-bump metals to support flip chips.
Thin films obtained by nickel vanadium sputtering targets can also be used as corrosion protecting metal barriers for the solar absorber aluminum substrate.
If you would like to give an order from nickel vanadium sputtering targets for your research needs you may check the links given below and contact with us:
Labels:

Comments

Post a Comment

Popular posts from this blog

Titanium Carbide Powders and Applications

Titanium carbide which has the chemical formula of TiC attracted great interest for many structural applications due to its extremely high melting temperature, high hardness, high chemical resistance and good electrical conductivity. Therefore titanium carbide can be used in cutting tools, grinding wheels, wear-resistant coatings, high temperature heat exchangers, magnetic recording heads, turbine engine seals, and bullet-proof vests, etc. In addition, a promising field of application comprises plasma and flame spraying processes in air, where titanium carbide-based powders show high-phase stability. TiC(Titanium Carbide Powder) (325 mesh, 99,9+%)  can also be used in biomedical implant devices. Materials used for biomedical implant devices must satisfy a variety of property demands, which are often mutually exclusive. Further, different parts of a device demand different material properties. These factors often make it difficult to manufacture a medical device using a...
Post a Comment
Read more

Hydroxyapatite Nanopowders and Their Applications

Hydroxyapatite, is a naturally occurring mineral form of calcium apatite with the formula Ca 5 (PO 4 ) 3 (OH). Pure hydroxyapatite powder is white. Naturally occurring apatites can, however, also have brown, yellow, or green colorations, comparable to the discolorations of dental fluorosis. Hydroxyapatite Nanopowder/Nanoparticles (50 nm, 99.95+%)  has been widely used as a biocompatible ceramic in many areas of medicine, but mainly for contact with bone tissue, due to its resemblance to mineral bone. In mammals, the skeleton presents a carbonated and partially substituted apatite, based on nanocrystal aggregates, and associated with collagen, building up 3-D structures present in various bone tissue conformations like trabecular or cancellous bone. There has been growing interest in developing bioactive synthetic ceramics that could closely mimic natural apatite characteristics. As mentioned before,  Hydroxyapatite Nanopowder  is the main inorganic constituent of bon...
Post a Comment
Read more

Usage of Silver Conductive Adhesive Paste in Corrosion Protection

In electronics, solders are main material to connect electrical components to substrates which are generally printed circuit boards. Although they are cheap, they are not effective if long term performance is considered since solders have low resistivity to corrosion relatively. Since corrosion reduce reliability, the cost of advanced technological systems such as RADAR, SONAR, LIDAR and more increase. In addition, small signals can be lost, and in huge data transfer, some of the data can be lost also especially which may lead catastrophic failures in critical systems. For instance, surface to air missiles can be launched to target which is not exist if the data coming from detection systems is noisy. Therefore, corrosion protection is necessary, and  silver conductive adhesive paste  is an essential candidate to replace PbSn solders due to its resistivity to corrosion. Silver conductive adhesive paste provide not only noisy reduction but also electromagnetic interference whi...
Post a Comment
Read more