Skip to main content

Zirconium Hydride Nanoparticles/Nanopowder and Applications

Zirconium hydride describes an alloy made by combining zirconium and hydrogen. Hydrogen acts as a hardening agent, preventing dislocations in the zirconium atom crystal lattice from sliding past one another. Varying the amount of hydrogen and the form of its presence in the zirconium hydride controls qualities such as the hardness, ductility, and tensile strength of the resulting zirconium hydride. Zirconium hydride with increased hydrogen content can be made harder and stronger than zirconium, but such zirconium hydride is also less ductile than zirconium.

Applications of Zirconium Hydride Nanoparticles/Nanopowder
Zirconium Hydride nanoparticles/nanopowder are used as strong reducing agents and foaming agents. In order to obtain hard alloys Zirconium Hydride nanoparticles/nanopowder are used as additive. In powder metallurgy, Zirconium Hydride nanoparticles/nanopowder are used as hydrogenation catalysts and in vacuum tube industry Zirconium Hydride nanoparticles/nanopowder are used as getters in the vacuum tube industry. In vacuum system, Zirconium Hydride nanoparticles/nanopowder help establish a seal between a metal and ceramic.

Technical Properties of Our Zirconium Hydride (ZrH2) 99.5%, 1.05-5.05 um Product
Purity (%)99.5
Average Particle Size (um)1.05-5.05
Density (g/cm3)5,8
Melting Point (°C)800


You may give an order of Zirconium Hydride (ZrH2) Nanopowder/Nanoparticle, 99.5%, 1.05-5.05 um from the link given below:


You may give an order of Zirconium Hydride(ZrH2) Nanopowder/Nanoparticle, %99.5+, 20-40 nm,  from the link given below:

Labels:

Comments

Post a Comment

Popular posts from this blog

Molybdenum Trioxide Nanoparticles/Nanopowder and Applications

General Information about Molybdenum Trioxide                                                     Molybdenum trioxide is chemical compound with the formula MoO3. Its chief application is as an oxidation catalyst and as a raw material for the production of molybdenum metal.  Molybdenum Trioxide  is a very light blue powder. Molybdenum Trioxide Nanoparticles/Nanopowder and Their Applications                                                    Like many  nanoparticles/nanopowder , Molybdenum Trioxide nanoparticles/nanopowder are used as catalysts. These catalysis reactions include hydrogenation catalysis and cracking catalysis. Molybdenum Trioxide nanoparticles/  nanopowder are useful for...
Post a Comment
Read more

Titanium Carbide Powders and Applications

Titanium carbide which has the chemical formula of TiC attracted great interest for many structural applications due to its extremely high melting temperature, high hardness, high chemical resistance and good electrical conductivity. Therefore titanium carbide can be used in cutting tools, grinding wheels, wear-resistant coatings, high temperature heat exchangers, magnetic recording heads, turbine engine seals, and bullet-proof vests, etc. In addition, a promising field of application comprises plasma and flame spraying processes in air, where titanium carbide-based powders show high-phase stability. TiC(Titanium Carbide Powder) (325 mesh, 99,9+%)  can also be used in biomedical implant devices. Materials used for biomedical implant devices must satisfy a variety of property demands, which are often mutually exclusive. Further, different parts of a device demand different material properties. These factors often make it difficult to manufacture a medical device using a...
Post a Comment
Read more

Bismuth Oxide Sputtering Targets and Applications

Bismuth oxide with the chemical formula of Bi 2 O 3  is one the most important bismuth compounds. Bismuth oxide has been investigated extensively due to its optical and electrical properties such as large energy gap (from 2 to 4 eV), refractive index and high oxygen ion conductivity at high and medium temperatures. These properties make bismuth oxide one of the most perspective candidates for application in optoelectronics, solar cells and solid oxide fuel cells (SOFCs). Bismuth oxide has a few main polymorphic forms that are known as α, β, γ, δ. All polymorphs have different crystal structure and various optical, electrical and mechanical properties. Only two of them, the low temperature monoclinic α-phase and high temperature face-centered cubic δ-phase are stable. The other phases are metastable. Magnetron sputtering is a widespread method because of high deposition rate, dense and highly adhesive films, and possibility of using commercially available large area depositio...
Post a Comment
Read more