Skip to main content

Nickel Hydroxide Nanoparticles/Nanopowder and Usage Areas

General Information about Nickel Hydroxide 
Nickel Hydroxide is an inorganic compound consists of Nickel metal, Oxygen and Hydrogen. At room temperature it is in green crystal form.                                                   
                                                                     
Nickel Hydroxide Nanoparticles/Nanopowder and Their Applications
Nickel Hydroxide Nanoparticles/Nanopowder are used in nickel cadmium battery, in nickel metal hydride battery and in rechargeable battery electrodes.

Technical Properties of Our Nickel Hydroxide (Ni(OH)2) Nanoparticles/Nanopowder,beta, 18nm, High Purity 99.99% Product
Purity %99.99
Colorgreen
AVERAGE PARTICLE SIZE (nm):18
SPECIFIC SURFACE AREA (m2/g):>75
Tap Density (g/cm3)1.00
True Density (g/cm3)4,2

You may give an order of Ni(OH)2 (Nickel Hydroxide) Nanoparticles/Nanopowder,beta, 18nm, High Purity 99.99% from the link given below:
Labels:

Comments

Post a Comment

Popular posts from this blog

Titanium Carbide Powders and Applications

Titanium carbide which has the chemical formula of TiC attracted great interest for many structural applications due to its extremely high melting temperature, high hardness, high chemical resistance and good electrical conductivity. Therefore titanium carbide can be used in cutting tools, grinding wheels, wear-resistant coatings, high temperature heat exchangers, magnetic recording heads, turbine engine seals, and bullet-proof vests, etc. In addition, a promising field of application comprises plasma and flame spraying processes in air, where titanium carbide-based powders show high-phase stability. TiC(Titanium Carbide Powder) (325 mesh, 99,9+%)  can also be used in biomedical implant devices. Materials used for biomedical implant devices must satisfy a variety of property demands, which are often mutually exclusive. Further, different parts of a device demand different material properties. These factors often make it difficult to manufacture a medical device using a...
Post a Comment
Read more

Carbon Nanotubes Doped with Graphene Nanopowder and Applications

Carbon nanotubes and graphene are different forms of carbon atom based materials. They have different properties and can be used in various applications. But what happens if we use them as a hybrid structure? The excellent mechanical, physical, and chemical properties of low-dimensional carbon materials like graphene and carbon nanotube have enabled them as promising building blocks for three-dimensional nanoarchitectures. In this regard, extensive interests have been attracted to synthesize graphene and carbon nanotube hybrid structures. Earlier works suggested that  Carbon Nanotubes Doped with Graphene Nanopowder (52 wt% Graphene )  is a promising solution for quick energy dissipation, which could enhance interface thermal conductivity of the ‘building blocks’ for future nanoscale mechanical and electrical devices. In the electricity perspective, it is found that ‘CNT pillared-graphene’ system would extend the excellent electrical conductivity of graphene and nanotube to ...
Post a Comment
Read more

Differences Between Cuprous Oxide (Cu2O) and Copper (Cupric) Oxide (CuO) Nanoparticles

Copper,  which is a d block element, is named as cuprous or cupric based on the electronic configuration. The main difference between cuprous and cupric is that  cuprous is copper +1 cation  whereas cupric is copper +2 cation. When copper is reacted with oxygen, two stable compounds Cu2O and CuO form.   Copper Oxide  is the inorganic compound with the formula CuO (Figure 1) also known as  ‘cupric oxide’ . In this form, Cu is in the form of Cu+2 and the electron configuration of the Cu changes from [Ar]3d104s1 to [Ar]3d94s0. It is known as tenorite as a mineral (Figure 2). CuO can be obtained by using pyrometallurgical processes. Figure 1: Copper Oxide (CuO) Powder Cuprous Oxide  is the other stable compound of Copper with formula Cu2O. In this form, Cu is in the form of Cu+1. Its electron configuration changes from [Ar]3d104s1 to [Ar]3d104s0 so it is more stable compared to copper(II) oxide. CuO(Figure 3) is generally obtained via the oxidat...
Post a Comment
Read more