Skip to main content

Neodymium Oxide Nanoparticles/Nanopowder and Applications

General Information about Neodymium Oxide  
                                     
Neodymium Oxide is the chemical compound composed of Neodymium and Oxygen with the formula Nd2O3. It forms very light grayish-blue hexagonal crystals.
Applications of Neodymium Oxide Nanoparticles/Nanopowder
Neodymium Oxide Nanoparticles/Nanopowder are used as catalysts and catalyst supports. It is also used as coloring agent of glass and ceramics. It is used as dopant for solid state lasers and as additive for Mg and Al alloys and polymers. For alloys containing magnesium or aluminum, Neodymium Oxide nanoparticles/nanopowder can be used as a sintering additive. In the production of some electric capacitors Neodymium Oxide nanoparticles/nanopowder are used. The unique color properties of Neodymium Oxide nanoparticles/nanopowder make them of particular use as a coloring agent when added to certain ceramics and glasses. Neodymium Oxide nanoparticles/nanopowder are also used as dopants for high-efficiency solid state lasers.

Technical Properties of Our Nd2O3 (Neodymium Oxide) Nanoparticles/Nanopowder, 25-40 nm, Purity 99.95% Product
Purity %99.95
Colorpale violet
AVERAGE PARTICLE SIZE (nm):25-40
SPECIFIC SURFACE AREA (m2/g):>45
Bulk Density (g/cm3)0,2
True Density (g/cm3)7,2

You may give an order of Nd2O3 (Neodymium Oxide) Nanoparticles/Nanopowder, 25-40nm, Purity 99.95% from the link given below:
Labels:

Comments

Post a Comment

Popular posts from this blog

Titanium Carbide Powders and Applications

Titanium carbide which has the chemical formula of TiC attracted great interest for many structural applications due to its extremely high melting temperature, high hardness, high chemical resistance and good electrical conductivity. Therefore titanium carbide can be used in cutting tools, grinding wheels, wear-resistant coatings, high temperature heat exchangers, magnetic recording heads, turbine engine seals, and bullet-proof vests, etc. In addition, a promising field of application comprises plasma and flame spraying processes in air, where titanium carbide-based powders show high-phase stability. TiC(Titanium Carbide Powder) (325 mesh, 99,9+%)  can also be used in biomedical implant devices. Materials used for biomedical implant devices must satisfy a variety of property demands, which are often mutually exclusive. Further, different parts of a device demand different material properties. These factors often make it difficult to manufacture a medical device using a...
Post a Comment
Read more

Hydroxyapatite Nanopowders and Their Applications

Hydroxyapatite, is a naturally occurring mineral form of calcium apatite with the formula Ca 5 (PO 4 ) 3 (OH). Pure hydroxyapatite powder is white. Naturally occurring apatites can, however, also have brown, yellow, or green colorations, comparable to the discolorations of dental fluorosis. Hydroxyapatite Nanopowder/Nanoparticles (50 nm, 99.95+%)  has been widely used as a biocompatible ceramic in many areas of medicine, but mainly for contact with bone tissue, due to its resemblance to mineral bone. In mammals, the skeleton presents a carbonated and partially substituted apatite, based on nanocrystal aggregates, and associated with collagen, building up 3-D structures present in various bone tissue conformations like trabecular or cancellous bone. There has been growing interest in developing bioactive synthetic ceramics that could closely mimic natural apatite characteristics. As mentioned before,  Hydroxyapatite Nanopowder  is the main inorganic constituent of bon...
Post a Comment
Read more

Usage of Silver Conductive Adhesive Paste in Corrosion Protection

In electronics, solders are main material to connect electrical components to substrates which are generally printed circuit boards. Although they are cheap, they are not effective if long term performance is considered since solders have low resistivity to corrosion relatively. Since corrosion reduce reliability, the cost of advanced technological systems such as RADAR, SONAR, LIDAR and more increase. In addition, small signals can be lost, and in huge data transfer, some of the data can be lost also especially which may lead catastrophic failures in critical systems. For instance, surface to air missiles can be launched to target which is not exist if the data coming from detection systems is noisy. Therefore, corrosion protection is necessary, and  silver conductive adhesive paste  is an essential candidate to replace PbSn solders due to its resistivity to corrosion. Silver conductive adhesive paste provide not only noisy reduction but also electromagnetic interference whi...
Post a Comment
Read more