Skip to main content

New Way of Deaf-Mute Communication with 3D Graphene


Chinese scientists have developed wearable electronic device with conductive 3D graphene structure to translate sign language into written text. This technology can be applied by injecting graphene ink from a syringe under printed electronic field. For medical field, such as adhesive patches which determine heart, brain signal and neural activity, wearable and bio-integrated medical devices are very important.
Due to noticeable properties of cast graphene, for example a 2D honeycomb lattice, excellent mechanical and electrical behaviors, Graphene has an important material in warble technology. However, it is difficult to preserve advantages of Graphene material in a 3D material which has an information about forces from every angle.
Yanlin Song and co-workers at the University of the Chinese Academy of Sciences, Beijing, and Shenyang Jianzhu University, Shenyang, have recently developed a 3D graphene material which is consisting of air-filled voids providing it to be compressed and stretched in any directions. To determine the body movements from electrical senses, aerogel is generally used because of its conductivity varies with physical deformations. Graphene could recognize hand gestures and translate them into written and spoken languages by the help of aerogel equipped with electrodes in poly(dimethylsiloxane). The researchers stated that aerogel, which is used in quite traditional printing technology, was extruded with oxidized graphene ink by a syringe then it was dried in vacuum freezer to remove liquid part of the ink. Aerogel’s electrical conductivity was achieved after the chemical reduction of the material with hydroiodic acid.  The scientists also used conductive aerogels with silver nanoparticles and quantum dots to produce electronic devices.
 Marcus Worsley from Lawrence Livermore National Laboratory, US, comments that applying graphene aerogels to wearable flexible electronics is a big step for demonstrating their great potential in the future.

http://nanografi.com/blog/new-way-of-deafmute-communication-with-3d-graphene/

Comments

Popular posts from this blog

Usage of Silver Conductive Adhesive Paste in Corrosion Protection

In electronics, solders are main material to connect electrical components to substrates which are generally printed circuit boards. Although they are cheap, they are not effective if long term performance is considered since solders have low resistivity to corrosion relatively. Since corrosion reduce reliability, the cost of advanced technological systems such as RADAR, SONAR, LIDAR and more increase. In addition, small signals can be lost, and in huge data transfer, some of the data can be lost also especially which may lead catastrophic failures in critical systems. For instance, surface to air missiles can be launched to target which is not exist if the data coming from detection systems is noisy. Therefore, corrosion protection is necessary, and  silver conductive adhesive paste  is an essential candidate to replace PbSn solders due to its resistivity to corrosion. Silver conductive adhesive paste provide not only noisy reduction but also electromagnetic interference whi...

Reduced Graphene Oxide and Applications

Graphene oxide (GO)  is a type of graphene that contains oxygen functional groups and has some interesting properties different than those of graphene. By reducing graphene oxide,  reduced graphene oxide  is obtained which is abbreviated to rGO. In this process, the functional groups of graphene are removed but it still contains residual oxygen, hetereatoms and structural defects which decrease its quality. Having less-quality compared to pristine graphene, rGO is still an outstanding material for various applications since it resembles an attractive cost and manufacturing processes compared to the pristine graphene. Especially, it is preferred in applications that call for a large amount of material. Depending on the method of preparation of reduced graphene oxide, properties and morphology of the rGO can vary.  Some preparation methods  of reduced graphene oxide include: treating graphene oxide with hydrazine hydrate at 100°C for 24 hours exposure to h...

Nanocellulose: Descriptions, Usage and Applications

Nanocellulose  is denoted by nano-structured cellulose which consist of C6H10O5. Since cellulose is abundant polymer in nature, large quantity of nanocellulose can be manufactured from the cost-effective aspect. Non-toxic and lightweight properties make it easy to carry, so it can be used in applications which requires mobility. High tensile, stiffness and electrical conductivity expand its usage through electrical and mechanical applications. Unique properties depending on the type of nanocellulose are also exist. There are three types which are cellulose nanocrystal (CNC), cellulose nanofibers (CNF), and bacterial nanocellulose (BNC). First type of nanocellulose is  cellulose nanocrystal , development in applications show that CNCs have unique specialities for improving mechanical properties of nanocomposites such as electrospun nanocomposite fibers/mats and nanocomposite hydrogels. Numerous nanocomposite hydrogels reinforced with CNCs can be designed to be sens...